Related Manuals for Cobra MM48SPH
Summary of Contents for Cobra MM48SPH
- Page 1 MODELS: MM48SPH (GL48S-U) COBRA LAWN MOWER OWNER’S MANUAL Cobra Garden Machinery Henton and Chattell Ltd., London Road, Nottingham NG2 3HW UK www.cobragarden.co.uk...
- Page 2 WARNING： For your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarise yourself with your mower before each use. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well.
- Page 3 WARNING： For your own safety please read this manual before attempting to operate your new mower. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarise yourself with your mower before each use. Symbols and Warnings Read the instruction handbook and follow all warning and safety instructions.
-
Page 4: General Safety Rules
KEEP HANDS AND FEET AWAY. WARNING: Keep the safety signs clear and visible on the equipment. Replace the safety signs if they are missing or illegible. GENERAL SAFETY RULES WARNING: When using petrol tools, basic safety precautions, including the following, should always be followed to reduce the risk of serious personal injury and/or damage to the unit. - Page 5 Training 1. Before using the lawnmower read the instructions carefully. Familiarise yourself with the controls and pay particular attention in learning how to stop the machine in an emergency. 2. Never allow children or people unfamiliar with these instructions to use the lawn mower. Local regulations can restrict the age of the operator.
- Page 6 18. Never put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. 19. Always ensure the engine is fully switched off before picking up/carrying the Lawnmower. 20. Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted remove the key, make sure engine has had time to cool.
- Page 7 15. In time your chassis may peel because of the abrasive action of the debris making contact. This can be remedied by touching up paintwork where necessary to prevent corrosion. 16. Improper maintenance, use of non-conforming replacement components, or the removal or modification of safety components can damage the lawnmower and injure the operators seriously.
- Page 8 Illustrations...
- Page 13 Parts Descriptions - See Illustration 1 Notice: the illustrations may vary from your present model A. Recoil starter (starter cord) B. Oil cap C. Gasoline filling cap D. Exhaust E. Spark plug G. Air filter H. Handlebar for drive Handlebar for engine brake J.
- Page 14 Mounting the start cord: Illustration 5 1. Pull the engine brake handlebar and hold in order to release the starter cord on the engine. 2. Pull gently the starter cord from the engine (Engine brake handlebar MUST be held) 3. Attach the starter grip on the loop of handlebar. 4.
- Page 15 Oil change and servicing Oil should be changed for the first time after 5 hours, then at least once per year. See a local Cobra dealer for service work. See the engine instruction manual for further details...
- Page 16 Please refer to the engine instruction manual for servicing details. Your local Cobra dealer will be able to supply replacement filters or complete a full service.
- Page 17 WARNING: Always ensure the engine is off and the spark plug connector removed before starting any maintenance of your lawnmower. Storage and maintenance Maintain your lawnmower: Check all bolts, screws, nuts and deck. Dismount the blade and the belt plastic cover for regular cleaning. Always make sure that the blade is sharp. Have your lawn mower serviced annually with your authorized service dealer.
- Page 18 Any damage that occurs from the use of non-genuine Cobra parts will not be covered. We reserve the right to reject any claim where the purchase cannot be verified or when it is clear that the product was not maintained properly.
-
Page 19: Ec Declaration Of Conformity
EN ISO 14982 Authorized Signature/Date/ Place: Peter J. Chaloner 11-30-2020 Title of Signatory: Managing Director Name and address of the Cobra Garden Machinery, Henton & Chattell Ltd, London Road, person authorized to Nottingham compile the technical file NG2 3HW UK...