Table of Contents
Advertisement
AD1200 Reference
Figure 2-10. D/A Output Range Selection.
___________________________________ _
DAC OUTPUT RANGE.
_________________
BUCBA
PN
I
0 to +10 Volts
0 to +5 Volts
-10 to +10 Volts
-5 to +5 Volts
-2.5 to +2.5 Volts
A/D Configuration.
________________ _
The gain of the AD converter, the input channel type and
the input voltage range can all be independently selected.
The A/D input channel number selection is under software
control. On the AD1200 and AD1210/11 the gain is also under
software control. On the AD1220/21 the gain cannot be set by
software but is selected using the ADC GAIN jumpers.
Input Channel Type.
The AD1200 card may be set for 16 channels of single ended
input, for 8 channels of differential input or for 16 channels of
pseudo differential input. The 6 A/D input select jumpers are in
centre right of the card.
Page 38
Installation Guide
UNIPOLAR
UNIPOLAR
BIPOLAR
BIPOLAR
BIPOLAR
DEFAULT
Chapter 2
Advertisement
Table of Contents
