Accessing The Scanner - Brother MFC-8460N Software User's Manual

Accessing the scanner

a
Open the software application (ScanSoft
Note
The instructions for scanning in this Guide are for when you use ScanSoft
scanning into another software application, the steps may vary.
b
Click File, then Scan. Or click the Scan button.
The Scan panel appears in the left side of the screen.
c
Choose the scanner you are using from the Scanner drop-down list.
Note
If the machine is connected via:
• Parallel-use Brother MFC-XXXX or Brother DCP-XXXX
• USB-use Brother MFC-XXXX USB or Brother DCP-XXXX USB
• LAN-use Brother MFC-XXXX LAN or Brother DCP-XXXX LAN
If you are using Windows
XXXX.
(Where XXXX is your model name.)
d
Click Scan.
The Scanner Setup dialog box appears:
®
PaperPort
® ®
XP/Windows Vista , choose TW-Brother MFC XXXX, not WIA-Brother MFC-
®
SE) to scan a document.
®
PaperPort
2. Scanning
2
®
SE. If you are
35