Create A New Job, Punch Edge - GBC Quantum P70iX Instruction Manual

CREATE A NEW JOB: Select a punch edge
USE ARROWS TO
0 . . 9
GO TO NEXT
ACCEPT
NO CHANGE
ESCAPE
SAVE
ESCAPE
To Edit an exiting job or create a new job, press the up – down arrows to select
the desired setting. In the example above, the Punch Edge paper dimension has
been selected and currently reads 11".
Alternatively, the dimension can be entered directly using the numeric keypad.
The machine will automatically toggle between inches and millimeters depend-
ing on the size of the number entered.
The min-max range for the punch edge is 5.50" to 12.00" (139.7 mm to 304.8
mm). If at this time you entered 140 and 305, the system would automatically
recognize the dimensions as 140 millimeters (mm).
Once the desired punch edge dimension appears on the display, press the
"ACCEPT" button.
5. Graphical User Interface
EDITOR
CHANGE
OTHER
SIZES
1
SETTING
GO BACK
DATA OK
STORE
SAVE
1
ACCEPT
4
7
2 3
5 6
8 9
0 OK
19