MacDon R1 Series Operator's Manual page 36

MD #247167
Blade cutting hazard
WARNING
To prevent injury from sharp cutting blades:
• Do NOT operate without shields in place.
• Disengage power take-off, stop engine and remove key
before opening covers.
• Blades may continue to rotate after power is shut off.
• Listen and look for evidence of rotation before opening
shield.
MD #259058
Off-center tracking hazard
WARNING
To prevent serious injury or death from off-center tracking,
follow these steps before towing the pull-type in transport
mode:
• Charge cylinder with oil.
• Rotate valve handle to lock in transport position.
• Maximum towing speed 32 km/h (20 mph).
215333
SAFETY
Figure 1.41: MD #247167
Figure 1.42: MD #259058
20
1023714
Revision A