Appendix A: Reference 30K Booster Specifications; Control Amplifier; 30 A Current Range; System (All With A Reference 3000 Potentiostat) - Gamry Instruments Reference 30k Booster Operator's Manual

Appendix A: Reference 30k Booster Specifications

All specifications are at an ambient temperature of 25C, 115 V
operated with a Reference 3000 potentiostat unless otherwise noted.
All specifications are subject to change without notice.

Control Amplifier

Compliance Voltage
Compliance Current
Voltage Gain
Unity-gain Bandwidth
Slew Rate

30 A Current Range

Full-scale Current
Accuracy

System (all with a Reference 3000 potentiostat)

Control Modes
Allowed Current Ranges

Mechanical

Dimensions (w x h x d)
Weight

Power

Input Voltage
Power (max.)
A potentiostat system with a Reference 30k Booster connected to a Reference 3000 Potentiostat will not
oscillate with any capacitive load as long as the Reference electrode impedance is less than 10 kΩ and the
control amplifier bandwidth is Normal or slower.
A galvanostat system with a Reference 30k Booster connected to a Reference 3000 Potentiostat will not
oscillate with any resistive load less than 100 Ω as long as the control amplifier bandwidth is Normal or slower.
This is only guaranteed when the cell is connected using Gamry's P/N 985-00122 cable. Stability with inductive
loads is not guaranteed.
Reference 30k Booster Specifications
+20 to –2.5
±30
2
500
>20
±30
±0.3
Potentiostatic, Galvanostatic, ZRA
30, 3, 0.3, 0.03
37 x 23 x 44
14.5 x 9 x 17.5
16
35
90 to 263
1200
43
power, and the Reference 30k Booster
AC
V
A
kHz
V/µs
A
% of range
A
cm
inch
kg
lbs
V
AC
W