Table of Contents
Advertisement
Chapter 3: Installation
This chapter covers normal installation of the Reference 30k Booster in a system with a Reference 3000
potentiostat.
Initial Visual Inspection
After you remove your Reference 30k Booster from its shipping carton, check it for any signs of shipping
damage. If any damage is noted, please notify Gamry Instruments, Inc., and the shipping carrier immediately.
Save the shipping container for possible inspection by the carrier.
Warning:
Booster is damaged in shipment. Do not operate damaged apparatus until a qualified service technician has
verified its safety. Tag a damaged Reference 30k Booster to indicate that it could be a safety hazard.
Included Parts
The following items are included with a Reference 30k Booster:
Item
Gamry P/N
1
990-00275
2
985-00122
3
988-00021
4
990-00284
5
985-00116
6
985-00120
7
630-00023
8
630-00027
9
821-00001
10
821-00002
In addition, shipments to locations known to have 115 VAC power should include:
Item
Gamry P/N
11
630-00024
12
630-00026
Installation – Initial Visual Inspection
The protective grounding can be rendered ineffective if the Reference 30k
Description
Reference 30k Booster Chassis
Cable, Ref 30k Counter
Working
Manual, Reference 30k Booster
Reference 30k Test and Cal cell
Cable, Ref3000 to Ref30k
Working Counter
Cable, Ref3000 to Ref30k
Expansion Interface
Fuse, Blade, 30 A, Green
Fuse, Nano 2 A
Nut Driver, 9/16"
Nut Driver, 13 mm
Description
Fuse, 5 × 20 mm, 12.5 A
time delay
Fuse, 5 × 20 mm, 6.3 A
time delay
Notes
The Booster Box
High-current cable to the cell, 90 cm
This document
3 mΩ and 200 mΩ
15-pin D Male to Female
25-pin D Male to Female
Qty 2, Spare fuses for Working and
Counter
Qty 3, Spare fuses for Test and Cal cell
Red Nut Driver for Front-Panel Working
and Counter-Mounting Studs
Black Nut Driver for Test and Cal cell
Notes
Qty 2, Spare AC line fuse
Qty 2, Spare mains fuse
23
Advertisement
Table of Contents
