Panel Indicators, Controls and Connectors – Rear-panel Connectors
Figure 4-2
Rear Panel of the Reference 30k Booster
Power Input Connector
The power input connector is a three-function module. It contains a line-cord connector, a fuse block, and the
power switch.
The fuses and fuse selection are described in Chapter 1. You must use fuses appropriate for the AC line voltage
(mains) in your area.
Warning:
You must use AC line fuses appropriate for the line voltage (mains) in your
working area. Incorrect line fuses can limit system performance and create hazardous conditions.
Line cord selection is also described in Chapter 1. You must use a line cord rated for a minimum of 1500 W.
36