Canon imageCLASS X LBP1238 Getting Started page 6

Quick Setup
Configuring the Machine
To connect via USB
• The machine does not come with a USB cable.
Please have one ready, if necessary.
• Make sure that the USB cable you
use has the following mark.
• Do not connect the USB cable before installing
the driver. If you did, disconnect the USB cable
from the computer, close the dialog box, and then
perform the following procedure from step 1.
1.
Install the driver and software.
P.6 "Installing the software"
• When a screen with instructions for
connecting the USB cable to the machine is
displayed, remove the sticker that covers the
En
USB port.
Now you are finished with the
configuration of the initial settings.
6
Installing the software
You can download the latest printer driver from
the Canon website (https://global.canon/).
For more details on the software installation
procedure, see the driver's manual.