About This Manual; Third Party Software - Canon imageCLASS X LBP1238 Getting Started

This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines as this equipment has
very low levels of RF energy. But it is desirable
that it should be installed and operated keeping
the radiator at least 20cm or more away from
person's body.
Use of shielded cable is required to comply with
class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to
the equipment unless otherwise specified in this
manual. If you make such changes or
modifications, you could be required to stop
operation of the equipment.
CANON U.S.A., INC
One Canon Park, Melville, NY 11747, U.S.A.
TEL No. 1-800-OK-CANON
Wireless LAN
Regulatory Information
Regulatory information for users in Brazil
Este equipamento possui um módulo de
radiação restrita homologado na Anatel sob o
número 04251-18-01529.
MODELO: AW-NM333
04251-18-01529
Resolução 680:
Este equipamento não tem direito à proteção
contra interferência prejudicial e não pode
causar interferência em sistemas devidamente
autorizados.
Para consultas, visite: www.anatel.gov.br
Regulatory information for users in Canada
English This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation is
subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
This equipment complies with ISED radiation
exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the ISED
radio frequency (RF) Exposure rules as this
equipment has very low levels of RF energy. But
it is desirable that it should be installed and
operated keeping the radiator at least 20cm or
more away from person's body.
Français [ French ] L'émetteur/récepteur exempt
de licence contenu dans le présent appareil est
conforme aux CNR d'Innovation, Sciences et
Développement économique Canada
applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes :
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le
fonctionnement.
Cet équipement est conforme aux limites
d'exposition aux rayonnements énoncées pour
un environnement non contrôlé et respecte les
règles d'exposition aux fréquences
radioélectriques (RF) CNR-102 de l'ISDE puisque
cet appareil a une niveau tres bas d'energie RF.
Cependant, il est souhaitable qu'il devrait être
installé et utilisé en gardant une distance de 20
cm ou plus entre le radiateur et le corps humain.
Regulatory information for users in Mexico
Módulo IEEE 802.11 b/g/n PARA RED
INALÁMBRICA
IFT ID: RCPAZAW18-0820
Marca: AzureWave
Modelo: AW-NM333
La operación de este equipo está sujeta a las
siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
Legal Limitations on the Usage of Your
Product and the Use of Images
Using your product to scan, print or otherwise
reproduce certain documents, and the use of
such images as scanned, printed or otherwise
reproduced by your product, may be prohibited
by law and may result in criminal and/or civil
liability. A non-exhaustive list of these
documents is set forth below. This list is intended
to be a guide only. If you are uncertain about the
legality of using your product to scan, print or
otherwise reproduce any particular document,
and/or of the use of the images scanned, printed
or otherwise reproduced, you should consult in
advance with your legal advisor for guidance.
Paper Money
•
• Travelers Checks
Money Orders
•
Food Stamps
•
• Certificates of Deposit
• Passports
Postage Stamps (canceled or uncanceled)
•
Immigration Papers
•
• Identifying Badges or Insignias
• Internal Revenue Stamps (canceled or
uncanceled)
Selective Service or Draft Papers
•
• Bonds or Other Certificates of Indebtedness
• Checks or Drafts Issued by Governmental
Agencies
Stock Certificates
•
• Motor Vehicle Licenses and Certificates of Title
Copyrighted Works/Works of Art without
•
Permission of Copyright Owner
Disclaimers
• The information in this document is subject
to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY
•
KIND WITH REGARD TO THIS MATERIAL,
EITHER EXPRESS OR IMPLIED, EXCEPT AS
PROVIDED HEREIN, INCLUDING WITHOUT
LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OF USE, OR
NON-INFRINGEMENT. CANON INC. SHALL NOT
BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY NATURE,
OR LOSSES OR EXPENSES RESULTING FROM
THE USE OF THIS MATERIAL.
The following applies in California, USA only:
•
The battery included with your product
contains Perchlorate Material and may require
special handling.
See http://www.dtsc.ca.gov/hazardouswaste/
perchlorate/ for details.

About This Manual

Trademarks
QR Code is a trademark of DENSO WAVE
INCORPORATED.
All brand names and product names appearing
on this manual are registered trademarks or
trademarks of their respective owners.

Third Party Software

This Canon product (the "PRODUCT") includes
third-party software modules. Use and
distribution of these software modules,
including any updates of such software modules
(collectively,the "SOFTWARE") are subject to
license conditions below.
(1) You agree that you will comply with any
applicable export control laws, restrictions or
regulations of the countries involved in the
event that the PRODUCT including the
SOFTWARE is shipped, transferred or
exported into any country.
(2) Rights holders of the SOFTWARE retain in all
respects the title, ownership and intellectual
property rights in and to the SOFTWARE.
Except as expressly provided herein, no
license or right, expressed or implied, is
hereby conveyed or granted by rights holders
of the SOFTWARE to you for any intellectual
property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use
with the PRODUCT.
(4) You may not assign, sublicense, market,
distribute, or transfer the SOFTWARE to any
third party without prior written consent of
rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may
transfer the SOFTWARE only when (a) you
assign to a transferee all of your rights to the
PRODUCT and all rights and obligations
under the conditions governing the
SOFTWARE and PRODUCT and (b) such
transferee agrees in writing to be bound by
all these conditions.
(6) You may not decrypt, decompile, reverse
engineer, disassemble or otherwise reduce
the code of the SOFTWARE to human
readable form.
(7) You may not modify, adapt, translate, rent,
lease or loan the SOFTWARE or create
derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make
separate copies of the SOFTWARE from the
PRODUCT.
(9) The human-readable portion (the source
code) of the SOFTWARE is not licensed to
you.
Notwithstanding (1) through (9) above, the
PRODUCT includes third-party software modules
accompanying the other license conditions, and
these software modules are subject to the other
license conditions.Please refer to the other
license conditions of third-party software
modules described in Appendix of Manual for
the corresponding the PRODUCT. This Manual is
available at https://oip.manual.canon/.
En
27