Advertisement
Appendix C -- Changing PCI4 Settings
Overview
Your PCI4 Potentiostat is fully compliant with the Windows Plug & Play system. PCI4 resources (interrupt
settings, register addresses) are not assigned hardware switches or jumpers. Instead, the Windows Device
Manager chooses resource assignments. The settings chosen by the Device Manager can be reviewed by
selecting Windows Control Panel, Device Manager from the Windows Start Menu.
NOTE: The Device Manager will only show a PCI4 if the hardware is actually
installed in the computer and is minimally functional. In the time period after
installing the software but prior to hardware installation, a PCI4 will not be seen in the
Windows Device Manager, even though its driver has been installed.
The Gamry Framework requires a "GAMRY5.INI" file. This file is used to name the potentiostats in the system.
Turnkey systems are configured appropriately for the items you have purchased with that system. User
installed systems should be configured using the Setup programs that come with Gamry Instruments' Windows
based application software.
This appendix is used when manual configuration is convenient or required. It includes:
A description of the "GAMRY5.INI file
•
Instructions for changing the Auxiliary D/A ranges.
•
Instructions for changing settings for the Auxiliary A/D input
•
Appendix C -- Changing PCI4 Settings -- Overview
6-5
Advertisement
