Advertisement
Chapter 2 -- Installation -- 1st Time Device Installation in Windows
As displayed in Figure 2-4, you enter a friendly name for your PCI4, as well as any authorization codes you
received with your instrumentation. The authorization codes are 10 digit codes that allow different Gamry
application software to be used with your PCI4. If you cannot locate your authorization codes, please contact
Gamry Instruments or your local Gamry Sales representative for assistance.
To enter an authorization code, simply click on the Add button. A dialog box will appear as shown in Figure
2-5. You enter the package name, like "EIS300", followed by the 10 digit authorization code.
Press OK when you are finished.
Figure 2-4
Install the Software Automatically
Figure 2-5
Enter an Authorization Code
2-7
Advertisement
