Advertisement
Device Manager
If you wish to make changes to the configuration of your PCI4 after it has already been installed, you must use
the Windows Device Manager. Steps for getting to the Device Manager can vary by operating system, so check
your operating system's online help for more specific information on how to get to the Windows Device
Manager.
Under Windows XP, right clicking on the My Computer icon and selecting Properties brings up the System
Properties dialog box. Select the Hardware Tab and then click on the Device Manager button. This should
bring up the Device Manager screen. Clicking on the + sign next to Gamry Instruments, should expand the
tree view to give you a screen that looks similar to the following figure:
You can now right click on any of the Devices listed under Gamry Instruments and select Properties to look at
or change its configuration.
Authorization Codes and Label
If you purchase additional Gamry application software, did not enter your authorization codes upon initial
device installation, or simply need to make a correction to your authorization codes, you can do so using the
Windows Device Manager. You can also change the Label you use for your device. The Gamry Framework
Application Software must first be closed before you can use the Device Manager to make changes. Next, you
must select the appropriate device, as discussed in the Device Manager section. Once you have selected the
appropriate device, right click and select Properties. Next, select Device Settings and you will see a screen
that looks like Figure 2-7:
Chapter 2 -- Installation -- Device Manager
Figure 2-6
Device Manager Window
2-9
Advertisement
