Advertisement
Cell Cable Installation
The Cell Connector is a 9 pin female D connector on the Potentiostat card.
The standard cell cable has a 9 pin D connector on one end and a number of leads terminated with banana
plugs on the other. The D connector end of the cable is connected to the Cell Connector on the Potentiostat
card. The knurled screws on this cable should always be used to hold the cable in place.
Caution: Other PC functions can use female 9 pin D connectors. Make sure that
your cell cable is plugged into the correct connector before making any
connection to your cell.
st
1
Time Device Installation in Windows
When a PCI4 is first connected to a computer running Windows, the Windows Plug and Play Manager will see
the new device, but will be uncertain what device it is. The message that will appear is something like "New
device found" or "Unknown PCI Bridge device Detected".
When this occurs after you've plugged in a PCI4 instrument, tell Windows that you would like to install the new
device.
Windows 7 Users: The following windows will not be displayed. Please skip to page 2-7 to continue the
installation process.
All other users should see a screen that looks something like this:
Chapter 2 -- Installation -- Cell Cable Installation
Figure 2 - 2
Welcome to the Found New Hardware Wizard
2-5
Advertisement
