Origin Acoustics EXPLORER THINFIT COLLECTION TF37EX Installation Manual

Origin Acoustics EXPLORER THINFIT COLLECTION TF37EX Installation Manual

Hide thumbs Also See for EXPLORER THINFIT COLLECTION TF37EX:

Advertisement

EXPLORER THINFIT COLLECTION
TF37DTEX
TF37EX
TFIW37EX
TF37EX, TF37DTEX, TFIW37EX Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EXPLORER THINFIT COLLECTION TF37EX and is the answer not in the manual?

Questions and answers

Summary of Contents for Origin Acoustics EXPLORER THINFIT COLLECTION TF37EX

  • Page 1 EXPLORER THINFIT COLLECTION ™ TF37DTEX TF37EX TFIW37EX TF37EX, TF37DTEX, TFIW37EX Installation Manual...
  • Page 2: Table Of Contents

    About Speaker Wire Thank you for purchasing the Explorer Collection. The Explorer Collection of Installing the Wire loudspeakers from Origin Acoustics were developed to withstand the harsh Wire Routing conditions found in marine environments. This includes exposure to saltwater, extreme temperature changes and airborne humidity. They will produce amazing...
  • Page 3: Specifications

    Template Impedance 6 ohm 6 ohm/channel Diameter 9 5/ 8 ” (244mm) 9 5/ 8 ” (244mm) Origin Acoustics TF37 6975 S Decatur Blvd Suite 140 Cutout Diameter 8 3/ 4 ”(222mm) 8 3/ 4 ”(222mm) Las Vegas, NV 89118...
  • Page 4: Speaker Placement

    Thinfit Collection™ Manual Thinfit Collection™ Manual Auxiliary Room (2 Speaker Placement) About Speaker Wire Position the two speakers in the You will need a wire that has at least two conductors; one that can be identified middle of the room, no less than 6’ as the positive and the other as the negative.
  • Page 5: Wire Routing

    Thinfit Collection™ Manual Thinfit Collection™ Manual Wire Routing 2. Painting the Grille Plan how you’ll route the wire to the desired speaker location. There are several In some situations the speakers may look better if the color matched the walls, methods for routing the wire, and you may need to combine several of them.
  • Page 6: Connecting The Wire

    Thinfit Collection™ Manual Thinfit Collection™ Manual template, check the Specifications section for cutout sizes.) If you’re unsure 6. Installing the Grille on whether there may be obstacles (such as pipes or wires) where you plan on installing the speaker, drill a ⅛ inch hole in the center of the circle, then put a bent Fit the grille over the speaker.
  • Page 7: Troubleshooting

    No Sound Make sure the proper source is selected on the amplifier or returning the product, it’s required that you contact Origin Acoustics prior to any receiver. return attempts. This way we can determine if the issue can be resolved without No Sound Check the cord connecting the amplifier with the source.
  • Page 8: Warranty

    If the product is determined to be defective, it will be repaired or replaced at • Damage caused by improper installation Origin Acoustics’ discretion. If the product must be replaced yet it is no longer manufactured, it will be replaced with a model of equal to or greater value that is •...
  • Page 9 6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461 ©2019 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.

Table of Contents