Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Origin Acoustics ThinFit TF 60 Series
Summary of Contents for Origin Acoustics ThinFit TF 60 Series
- Page 1 TF 60 & 30 Series ThinFit Collection Installation Manual TF64DT, TF36, TF34...
-
Page 2: Table Of Contents
Table of Contents Introduction Specifications What’s Included Tools & Items Wire Recommendation Speaker Placement About Speaker Wire Installing the Wire Wire Routing Painting the Grille Cutting the Hole Connecting the Wire Installing the Speaker Installing the Grille Testing & Adjustments Installing the Grille Troubleshooting Technical Assistance... -
Page 3: Introduction
Introduction Thank you for purchasing the ThinFit 60 & 30 In-Ceiling Speaker. At Origin Acoustics, we take pride in providing you with a high quality product. All of Origin Acoustics’ speakers are designed to have excellent sound quality, longevity, and a simple installation process. -
Page 4: Specifications
Specifications Model TF64DT TF36 TF34 Part Number STF2T6400 STF3600 STF3400 Woofer Cone Fiber Glass Woofer 6.5 (165mm) 3.5” (89mm) 3.5” (89mm) Diameter Tweeter Dome Aluminum Silk DPSD Aluminum Tweeter 0.75” (20mm) 0.75” (20mm) 0.75” (20mm) Diameter Frequency 45 Hz - 20 kHz 50 Hz - 20 kHz 55 Hz - 20 kHz Response... -
Page 5: What's Included
What’s Included Speaker Grille Template Tools & Items • Drywall Saw • Measuring Tape • Stud Finder • Speaker Wire • Drill • Fish Tape • Pencil • Drill Bit ⅛” (3mm) • Spray Paint • Wire Stripper • Stiff Wire •... -
Page 6: Speaker Placement
Auxiliary Room (2 Speaker Placement) Position the two speakers in the mid- dle of the room, no less than 6’ (2m) apart. Ideally, the two speakers would 6’ (2m) be placed an equal distance from the listener. If the room has a lower ceiling, 3’... -
Page 7: About Speaker Wire
About Speaker Wire You will need a wire that has at least two conductors; one that can be identified as the positive and the other as the negative. All two conductor wires have some means of identifying which conductor is which, but at times this identification may be subtle. -
Page 8: Wire Routing
Wire Routing Plan how you’ll route the wire to the desired speaker location. There are several methods for routing the wire, and you may need to combine several of them. Behind the Baseboard Through Walls The wire can be routed behind the When running wires through a wall, be baseboard by cutting a groove out of sure to avoid all obstacles such as AC... -
Page 9: Painting The Grille
2. Painting the Grille In some situations the speakers may look better if the color matched the walls, ceiling, or trim in the room. This can be accomplished by painting the grille. The grille must be painted with spray paint, and most hardware stores will mix a can of paint to match whatever color you need. -
Page 10: Connecting The Wire
plate, check the Specifications section for cutout sizes.) If you’re unsure on wheth- er there may be obstacles (such as pipes or wires) where you plan on installing the speaker, drill a ⅛ inch hole in the center of the circle, then put a bent coat hanger through the hole to feel around. -
Page 11: Installing The Grille
6. Installing the Grille Fit the grille over the speaker. The grille uses magnets to be held in place. -
Page 12: Testing & Adjustments
Troubleshooting If possible, it’s often good to try to isolate the problem first. For example, if you’re playing a DVD on a television and there’s no sound, try connecting an MP3 player to the system to see if that works. If it does work, then the problem is with the tele- vision, DVD player, or the cables connecting them. -
Page 13: Technical Assistance
If you are considering returning the product, it’s required that you contact Origin Acoustics prior to any return at- tempts. This way we can determine if the issue can be resolved without returning the product, or if needed we can provide instructions and support for the return process. -
Page 14: Warranty
Limited Lifetime Warranty Origin Acoustics warrants to the original retail purchaser only that this Origin Acoustics product will be free from defects in materials and workmanship, pro- vided the speaker was purchased from an Origin Acoustics authorized dealer. If the product is determined to be defective, it will be repaired or replaced at Ori- gin Acoustics’... -
Page 15: Return Process
Before making any return attempts, it is required that you first contact Origin Acoustics. Return product to Origin Acoustics or your dealer, either in person or by mail. It’s preferable if the product is returned in the original packaging. If this isn’t possible, the customer is responsible for insuring the shipment for the full value of the product. - Page 16 • 844-674-4461 ©2017 Origin Acoustics...
Need help?
Do you have a question about the ThinFit TF 60 Series and is the answer not in the manual?
Questions and answers