Smartgrid; Machine Parameters; Legal Information - Miele PDR 914 Operating And Installation Instructions

SmartGrid

The SmartGrid setting is only visible if a WiFi network has been set up and activated. This
function can be used for starting your Miele Professional machine automatically at a time
when your energy supplier's electricity tariffs are most economical.
SmartGrid
Activating
control to set SmartStart. The tumble dryer will then start within the timeframe specified
when it receives a signal from the energy supplier. If it has not received a signal from the
energy supplier by the latest start time set, the tumble dryer will start automatically.
Factory default: off

Machine parameters

Legal information

Open source licences
You can view information here.
Copyrights and licences
For the purpose of operating and controlling the machine, Miele uses proprietary or third-
party software that is not covered by open source licensing terms. These items of soft-
ware/software components are protected by copyright. The copyrights held by Miele and
third parties must be respected.
Furthermore, this machine contains software components which are distributed under
open source licence conditions. Please refer to the menu option
meters Legal information
/
ents contained therein, together with the corresponding copyright notices, copies of the li-
censing conditions valid at the time and any further information. The liability and warranty
arrangements for the open source licences displayed in this location only apply in relation
to the respective rights holders.
Timer
gives the sensor control a new function. Use the
Open source licences
/
Settings
in the machine for the open source compon-
Supervisor level
Timer
sensor
Machine para-
/
51