Special Programmes - Miele PDR 914 Operating And Installation Instructions

Supervisor level
Confirm using the Save sensor control.

Your selection is now active.

Special programmes

You can put together 5 special residual moisture or time-controlled programmes and as-
sign your own programme names.
First, enter the programme name.
Select the special programme you want to change.

Save as
The menu opens.
Use the letters and symbols below the line to enter the name.

Save
Touch the sensor control.

You can now enter the parameters for a Res. moisture programme or Timed drying.
The 5 special programmes are pre-programmed at the factory. You can change these spe-
cial programmes.
The special programmes are added to the programme packages. Enter the name and set-
tings of your special programme into the "Special programmes" table in the "Programme
overview" chapter.
Res. moisture programme
Final residual moisture
-
-6 % (dry) – 40 % (damp)
- Extra drying time :
0–60 minutes
Temperature
- (Process air):
cold – 60 °C
Cooling down temperature
-
40–55 °C
- Anti-crease
Drum rotation, main direction
–
0–500 seconds
Pause
– :
100–3000 seconds
– Drum reversal :
0–500 seconds
Timed drying
:
Running time
- :
1–120 minutes
Temperature
- (Process air):
cold – 60 °C
Cooling down temperature
-
40–55 °C
44
:
:
(Process air):
:
(Process air):