Table of Contents
Advertisement
Housekeeping info-event
Housekeeping error-event
Dallmeier electronic
DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
The relay is switched if the system monitoring (house-
keeping) detects an event of the category "info".
Events of the category "info" are:
- The internal temperature is in the upper/lower/normal
range.
- The external temperature is in the upper/lower/normal
range.
- The CPU temperature is in the upper/lower/normal range.
- The average system temperature is in the upper/lower/
normal range.
- The internal/external/CPU temperature average system
temperature has reached the upper limit. The Recorder
dialog will be shut down.
- The revolution of the front fan is too high/too low/
normal.
- The revolution of the rear fan is too high/too low/
normal.
- The revolution of the HDD fan is too high/too low/
normal.
The relay is held until the system monitoring defines the
status as "normal". The time for which the relay is held
can also be set via the Timer.
The relay is switched if the system monitoring (house-
keeping) detects an event of the category "error".
Events of the category "error" are:
- The I/O board could not be put into operation.
- The I/O board is ready for operation.
- The display could not be put into operation.
- The display is ready for operation.
- The CPU temperature cannot be determined.
- The CPU temperature can be determined.
- The internal temperature cannot be determined.
- Error during determination of the internal temperature.
- The internal temperature can be determined.
- The external temperature cannot be determined.
- Error during determination of the external temperature.
- The external temperature can be determined.
- The revolution of the front fan cannot be determined.
- Error during determination of the revolution of the front
fan.
- The revolution of the front fan can be determined.
- The front fan does not rotate anymore.
- The front fan rotates again.
- The revolution of the rear fan cannot be determined.
- Error during determination of the revolution of the rear
fan.
- The revolution of the rear fan can be determined.
- The rear fan does not rotate anymore.
- The rear fan rotates again.
- The revolution of the HDD fan cannot be determined.
- Error during determination of the revolution of the HDD
fan.
- The revolution of the HDD fan can be determined.
- The HDD fan does not rotate anymore.
- The HDD fan rotates again.
98
Advertisement
Table of Contents
