Table of Contents
Advertisement
Housekeeping-
System motoring
Camera failure
Camera contact
No Recording
SEDOR
SEDOR
Sensor contact
Overflow Exeeded
Overflow Not Exceeded
Standard Track Saved
Dallmeier electronic
®
-Alarm Sabotage
®
Error
DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
This message will be send if the system monitoring Sys-
tem monitoring (housekeeping) detects an event of the
category „info".
Events of the category „info" are:
- The internal temperature is in the upper/lower/normal
range.
- The external temperature is in the upper/lower/normal
range.
- The CPU temperature is in the upper/lower/normal
range.
- The average system temperature is in the upper/lower/
normal range.
- The internal/external/CPU or average system temperature
has reached the upper limit. The recorder will be shut
down.
- The revolution of the front fan is too high/too low/nor-
mal.
- The revolution of the rear fan is too high/too low/
normal.
- The revolution of the HDD fan is too high/too low/
normal.
This message will be send if fails or is working again.
This message will be send if the recorder starts recording
of a camera because of a contact IN function (Start recor-
ding camera (recording mode Contact).
This message will be send if no recording is triggered in a
particular track in a defined period. Relevant are cameras/
tracks with the recording mode motion or contact. The
appropriate configuration is done in Setup > System >
Options > Recording Timeouts.
This message will be send if SEDOR
event on a camera (defocusing, turning, covering).
This message will be send if SEDOR
error.
This message will be send if the sensor (sensor card SK6)
detects a movement and thus triggers a recording.
The current recorder version does not support this mes-
sage (no SK6).
This message will be send if more then 80% of the video
memory is occupied.
This message will be send if the occupation of the video
memory falls below 80% again (e. g. when tracks have
been deleted).
This message will be send if the recorder saves a Secure
Track from being overwritten. It is irrelevant which event
(Alarm or Contact IN) triggers the saving function.
®
detects a sabotage
®
detects an internal
82
Advertisement
Table of Contents
