Set Up Mega Live Imaging On The Control Head - Humminbird 532769-3_A Installation Manual

2. Set Up MEGA Live Imaging on the Control Head

APEX/SOLIX Series
Your APEX or SOLIX control head will automatically detect and subscribe to MEGA
Live Imaging. To review the selected sonar sources, open the Settings tool, and
select CHIRP Sonar > Sonar Source.
HELIX Series
Your HELIX control head will automatically detect and subscribe to MEGA Live
Imaging. Use the following instructions to confirm that MEGA Live is selected in the
Network Source Setup dialog box. It might take up to a minute for the equipment
to be detected.
1. Main Menu: Press the MENU key twice.
2. Select the Network tab > Network Source Setup. Press the RIGHT Cursor key.
3. Select the Live tab from the Network Source Setup dialog box.
4. Select MEGA Live from the transducer list. Press the RIGHT Cursor key. A
checkmark will display in the box to show it is selected.
5. Press the EXIT key until the dialog box is closed.
GPS Diagnostic View
External GPS
detected
25
Fix type should
be 3D or
Enhanced
Control Head Setup