Timer Function - Motorola Air Conditioners Instruction Manual

OPERATING INSTRUCTIONS

TIMER function

TIMER
To set the automatic switch-on /off
of the air conditioner
Timer setting/change/cancel:
1. Press OPTION at the first time , select the Timer by
pressing the button or until symbol TIMER
is flashing;
2. Press OPTION again, the data symbol like
and TIMER will be flashing;
3. To set the timer or change the timer:
(1)Press the button or to set the expected timer
(Increase or decrease a
the symbols h and TIMER both are flashing.
(2) Press OPTION or waiting for 5 seconds without any
operation to confirm the timer , the pre-setting
timer like and symbol
4. To cancel the timer(if TIMER is on)
Repeat step 1, step 2, then press OPTION or waiting for 5
seconds without any operation to cancel the timer .
A sample for the Timer-on as Figure1, Timer-off as Figure2
Note:
All processing should be operated in 5 seconds,
otherwise the processing will be cancelled.
I FEEL function (Optional)
I FEEL
Press OPTION at the first time , select the I FEEL by
pressing the button or until symbol I FEEL
is flashing; Press OPTION again to activate the
I FEEL function, and
Do it again to deactivate this function.
This function enable the remote control to measure
the temperature at its current location and send this
signal 7 times in 2 hours to the air conditioner to
enable the air conditioner to optimize the temperature
around you and ensure maximum comfort.
It will automatically deactivate 2 hours later.
t half-hour intervals
will be on the display.
TIMER
appears on the display.
I FEEL
)
HEAT
TIMER TIMER
CLEAN DISPLAY CLEAN DISPLAY
Figure1,Timer-on
when switch off
15
HEAT
SLEEP TIMER I FEEL SLEEP TIMER I FEEL
DISPLAY 8 CH DISPLAY 8 CH
Figure2,Timer-off
when switch on