Auto Mode; Sleep Function - Motorola Air Conditioners Instruction Manual

OPERATING INSTRUCTIONS
FAN MODE(Not FAN button)
The air conditioner works in only
ventilation.
FAN
To set the FAN mode , Press MODE until
FAN appears on the display.
To optimize the function of the air conditioner, adjust
the temperature(1), the speed (2) and the direction of the
air flow (3) by pressing the buttons indicated.

AUTO MODE

Automatic mode.
AUTO
To activate the AUTO mode of operation,
press the MODE button on the remote controller until
the symbol AUTO appears on the display.
In AUTO mode the run mode will be set automatically
according to the room temperature.
To optimize the function of the air conditioner, adjust
the temperature(1), the speed (2) and the direction of the
air flow (3) by pressing the buttons indicated.
DISPLAY function (Indoor display)
Switch on/off the LED display on panel
DISPLAY
Press OPTION at the fist time , select the DISPLAY by
pressing the button or until symbol DISPLAY is flashing;
Press OPTION again to switch off the LED display on the
panel, and appears on the remote controller display.
DISPLAY
Do it again to switch on the LED display.

SLEEP function

SLEEP
Press OPTION at the first time , select the SLEEP by
pressing the button or until symbol SLEEP is flashing;
Press OPTION again to activate the SLEEP function,
and appears on the display.
SLEEP
Do it again to deactivate this function.
After 10 hours running in sleep mode the air conditioner
is swicthed off automatically.
13