The air conditioner works in GEN mode
Through GEN mode,you can choose the current level of
the unit.There are three levels (L1,L2,L3) in this mode,
and the current increases in turn.
To activate GEN function,pressing the button GEN and
the unit current level will cycle as below
OFF L3 L2 L1
To cancel this function,press the GEN until code OFF
appers on the display.
In this mode the appliance automatically sets the operation to
achieve energy savings.
1. Press the "ON / OFF" button to turn on appliance and select
a COOLING / HEATING mode.
2. Press the "ECO" button, the appliance will run in ECO mode.
3. Pressing the "ECO" button again will cancel the mode, "ECO"
will no longer be shown on the LCD screen.
The ECO function is available in COOLING and HEATING modes.
To activate turbo function,pressing the button TURBO
or pressing the button FAN until symbol
on the display.
To cancel this function, pressing the FAN to switch
other fan speed or pressing the TURBO button again.
In AUTO/HEAT/COOL/FAN mode,
When you select TURBO feature, it will use
the highest fan setting to blow strong airflow.