Download Table of Contents Print this page

Cooling Mode; Heating Mode (Optional); Dry Mode - Motorola Air Conditioners Instruction Manual

Advertisement

OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS

COOLING MODE

The cooling function allows the air condit-
ioner to cool the room and at the same time
COOL
reduces Air humidity.
To activate the cooling function ( COOL ) , press the
MODE button until the symbol COOL
appears on the display.
The cooling function is activated by setting the button
or at a temperature lower than that of the room.
To optimize the function of the Air conditioner, adjust
the temperature (1) , the speed (2) and the direction
of the air flow (3) by pressing the button indicated.

HEATING MODE (Optional)

The heating function allows the air conditi-
HEAT
oner to heat the room.
To activate the heating function ( HEAT ) , press the
MODE button until the symbol HEAT
appears on the display.
With the button
or
that of the room..
To optimize the function of the Air conditioner adjust
the temperature ( 1 ), the speed ( 2 ) and the direction
of the air flow ( 3 ) by pressing the button indicated
In HEATING operation, the appliance can automatically
activate a defrost cycle, which is essential to clean the
frost on the condenser so as to recover its heat exchange
function.This procedure usually lasts for 2-10 minutes
during defrosting,indoor unit fan stop operation.
After defrosting ,it resumes to HEATING mode
automatically.

DRY MODE

This function reduces the humidity of the
DRY
air to make the room more comfortable.
To set the DRY mode , Press MODE until
DRY appears in the display . An automatic
function of alternating cooling cycles and air
fan is activated.
set a temperature higher than
12

Advertisement

loading

Table of Contents