Workhorse ALLISON 1000MH Service Manual page 509

WORKHORSE CUSTOM CHASSIS
Service Manual
26. Rotate the engine clockwise, using the crankshaft bolt
in order to access the torque converter bolts through
the starter opening. Have an assistant rotate the
engine while aligning the bolts.
27. Remove the torque converter bolts (3).
WSM082106
PAGE
SECTION
7.2 509
© 2006 Workhorse Custom Chassis — All Rights Reserved
Automatic Transmission – Allison
28. Remove the transmission fi ll tube nuts from the
converter housing studs.
2007 W Series Chassis
2007 W Series