Belmash SDM-2000 Operating Manual page 63

and take away considering their weight and dimensions;
● floor should not be slippery and have obstacles;
● the machine and workplace should be kept clean;
● workplace should be well illuminated with natural or artificial light sources; please note
that the usage of fluorescent lighting causes a stroboscopic effect which may lead to
incorrect determination of rotating direction of machine's moving parts;
● it's necessary to provide continuous air change in working rooms by airing or ventilation;
● do not work in rooms with explosive or chemically active areas;
● fire prevention regulations should be followed; it's necessary to have a fire-extinguisher
available.
● keep children or other unauthorized persons out of working area;
● while machine operation, keep steady stance and do not try to reach distant located
objects;
● during operation avoid contact with grounded devices (e.g. pipelines, electric hot
plates, fridges etc.);
● do not stand across the working plane of circular saw blade; keep to the left or to the
right from it;
● be attentive, watch your actions and do not operate when you are tired;
● do not use damaged saw blades and knives;
● use only blades, knives, cutters and equipment recommended by the manufacturer;
● pay attention that the type of saw blade depends on the material being processed;
● use the splitting blade and adjust it correctly;
● use the upper guard (case) of saw blade and adjust its position correctly;
● avoid the machine overload;
● do not try to process blanks that are too short and thin;
● replace the plastic insert of saw blade if it is worn out.
Even if the machine is operated correctly, there may arise the following hazards:
● injury danger by a blank flown from operation point;
● injury danger by debris flown from a broken blank;
● noise and dust hazard;
● electric shock hazard in case of incorrect hardwiring.
To decrease the noise effect from running machine, you must use hearing protection
equipment (earplugs). To protect respiratory tract, use face shield.
Overall duration of presence in operation area with no hearing protection equipment should
not exceed 4.8 hours.
Provide safe storage of the machine. Keep it in dry rooms inaccessible to children.
In case of malfunction, the machine should be repaired by qualified personnel with the
usage of original spare parts.
Weight of a blank being processed should not exceed 50 kg.
When processing the blanks more than 2 m long, it's necessary to use supports mounted
under the overhanging end of the blank or to operate in tandem. Minimal height of a blank
for sawing and milling – 5 mm.
The processed blank should be checked for the presence of metal or mineral inclusions (nails,
clips, debris, rocks etc.). Do not process the materials having cracks, loose knots, rottenness
7.2 Added safety precautions
7.3 Operational hazards of the machine
7.4 Requirements for blanks
EN
63