Introduction; Declaration Of Conformity Ес/Ееа - Belmash SDM-2000 Operating Manual

EN
This operating manual establishes machine service instructions and rules of safe operation.
Please read all instructions contained in this operating manual before using the machine.
The woodworking machines, if not operated safely, may endanger human life and health.
Hazardous exposure: noise, vibration, dust and cutting wastes, electricity.
in use and helps to avoid problems during operation and maintenance.
by the manufacturer after the publication of this manual, as well as changes in component
details and documentation attached to it.
1. DECLARATION OF CONFORMITY ЕС/ЕЕА
Joint limited liability company "Zavod Belmash" declares that multifunctional woodworking
machines
BELMASH SDM-2000
BELMASH SDM-2200
BELMASH SDM-2500
comply with the following requirements of EU Directives, including changes:
2006/42/EC Machinery (MD)
2004/108/EC Electromagnetic Compatibility (EMC)
2011/65/EURO HS Directive
A basis for concordance of the mentioned above devices with the EU Directives is their full
compliance with the applicable standards listed below:
EN 61029-1: 2009 + A11: 2011
EN 62233: 2008 (incl. Corr: 2008)
EN 55014-1: 2006 + A1: 2009
EN 55014-1: 2006 + A1: 2009+А2: 2011
EN 55014-2: 2015
EN 61000-3-2: 2014**
EN 61000-3-3: 2013*
01/222-1*
01/222-2**
_____________________________________________
* for machines BELMASH SDM-2000
** for machines BELMASH SDM-2200, BELMASH SDM-2500
Director _________________ D. Shorikov
"Zavod Belmash" JLLC
37 Slavgorodskiy passage, Mogilev city, 212000, Republic of Belarus, info@belmash.by.
56