QDI P5I945P Manual page 24

BIOS Description
AWDFLASH.EXE
This is a flash memory write/read utility used for the purpose of upgrading your BIOS
when necessary. Before doing so, please note:
We strongly recommend you only upgrade BIOS when encounter problems.
Before upgrading your BIOS, review the description below to avoid making
mistakes, destroying the BIOS and resulting in a non-working system.
When you encounter problems, for example, you find your system does not support the
latest CPU released after our current mainboard, you may therefore upgrade the BIOS,
please don't forget to set BIOS_WP(option) as open and disable the "BIOS Protect" item in
AWARD BIOS CMOS Setup first .
Follow the steps exactly for a successful upgrade.
1. Create a bootable system floppy diskette by typing Format A:/s from the DOS prompt
under DOS6.xx or Windows 9x environment.
2. Copy AWDFLASH.EXE(version>=8
Utility CD to your new bootable diskette.
3. Download the updated BIOS file from the Website (http://www.qdigrp.com). Please
be sure to download the suitable BIOS file for your mainboard.
4. Decompress the file download, copy the BIOS file (xx.bin) to the bootable diskette,
and note the checksum of this BIOS which is located in readme file.
5. Reboot the system from the bootable diskette created.
6. Then run the AWDFLASH utility at the A:\ prompt as shown below:
A:\AWDFLASH xxxx.bin
Follow the instruction through the process. Don't turn off power or reset the system until
the BIOS upgrade has been completed.
If you require more detailed information concerning AWDFLASH Utility, for example, the
different usage of parameters, please type A:\>AWDFLASH /?
Note:
.60aq) from the directory \Utility located on QDI
1. We are only introduce basic BIOS . You can see the
detailed BIOS after press<Ctrl> +F1.
2. Because the BIOS Software will be updated
constantly, the following BIOS screens and descrip-
tions are for reference purposes only and may not re-
flect your BIOS screens exactly.
18
P5I945P(G)