Motion Parameters Menu; Speed Menu - Bosch UPH-C495N-L8120 Installation Manual

High-speed Positioning System
OSD Video Enabling
Video Character Type
Horizontal Delta/Vertical
Delta
Address Number
8.3

Motion Parameters Menu

The Motion Parameters menu is used to control the speed, limits, preset/patrol/autopan,
wiper-washer, and the alarm settings of the UPH.
MOTION PARAMETERS MENU
> 1 - SPEEDS
2 - LIMITS
3 - PRESET/PATROL/AUTOPAN
4 - WIPER-WASHER
5 - ALARMS
8.3.1

Speed Menu

The Speed menu is used to control the pan and tilt movement of the UPH in manual control
mode using the joystick. See Section 8.3.1 Speed Menu, page 45 for setting pan and tilt speeds
for the presets, patrols, and scans.
SPEED MENU
> 1 - PAN SPEED
2 - TILT SPEED
3 - ZOOM DEPENDENT SPEED
Bosch Security Systems, Inc.
Set to YES to superimpose the menu text over the video signal
from the camera. Set to NO to have a blue screen behind the
menu TEXT.
Set to 0 to make the background of the text to transparent; set to
1 to make it black.
These set the position of reference to the title so that the text can
be centralized. 0 (left, up) and 6 (right, down).
If enabled, the address number of the unit is shown at the top left
of the screen during normal operation. Yes/No.
>
>
>
>
>
SPEED MENU - PAN
> 1 - SPEED 1... 1.0 gr./s
> 2 - SPEED 2... 2.0 gr./s
> 3 - SPEED 3... 5.0 gr./s
:NO 4 - SPEED 4... 10.0 gr./s
5 - SPEED 5... 20.0 gr./s
6 - SPEED 6... 30.0 gr./s
7 - SPEED 7... 40.0 gr./s
8 - DEFAULT
SPEED MENU - TILT
" 1 - SPEED 1... 1.0 gr./s
2 - SPEED 2... 2.0 gr./s
3 - SPEED 3... 3.0 gr./s
4 - SPEED 4... 5.0 gr./s
5 - SPEED 5... 8.0 gr./s
6 - SPEED 6... 10.0 gr./s
7 - SPEED 7... 20.0 gr./s
8 - DEFAULT
Installation Manual
Configuring the System | en
F.01U.164.491 | 2.0 | 2010.03
45