Bosch NWC-0455-20P Operating Instructions Manual page 54

54 en | Configuration via the browser
JPEG posting interval
Enter the interval in seconds at which the images will be sent to
an FTP server. Enter zero if you do not want any images to be
sent.
FTP server IP address
Enter the IP address of the FTP server on which you wish to
save the JPEG images.
FTP server login
Enter your login name for the FTP server.
FTP server password
Enter the password that gives you access to the FTP server.
Path on FTP server
Enter the exact path on which you wish to post the images on
the FTP server.
Post JPEG from camera
Check the box to activate one or more camera inputs for the
JPEG image. An enabled camera input is indicated by a check
mark.
NOTE!
i
The numbering follows the labeling of the video inputs on the
actual unit.
V 2.5 | 2007.6
was stored on February 16, 2006 at 12.45 p.m. and 30 sec-
onds.
Operating Instructions
Dinion IP
Bosch Security Systems