Setting The Phone Line Type; Pabx And Transfer - Brother MFC-8220 User Manual

Setting the Phone Line Type

If you are connecting the MFC to a PBX or PABX, you need to
change the Phone Line Type to PBX by completing the following
steps.
1
Menu
Press
2
Press
PBX (or Normal ).
Set
Press .
3
Stop/Exit
Press

PABX and TRANSFER

The MFC is initially set to be connected with PSTN (Public Switched
Telephone Network) lines. However, many offices use a central
telephone system or Private Automatic Branch Exchange (PABX).
Your MFC can be connected to most types of PABX. The MFC's
recall feature supports timed break recall only (TBR). TBR will work
with most PABX systems, allowing you to gain access to an outside
line or transfer calls to another extension. The feature works when
Tel/R
the key is pressed.
You can program a
in a One-Touch or Speed-Dial location. When programming the
One-Touch or Speed-Dial number (Function menu 2-3-1 or
2-3-2) press
telephone number. If you do this, you do not need to press
Tel/R
each time before you dial using a One-Touch or
Speed-Dial location. (See Storing numbers for easy dialling on
page 7-1.)
4 - 5 GETTING STARTED
0 4
, , .
or to select ISDN ,
.
Tel/R
key press as part of a number stored
Tel/R
first (the screen displays "!"), then enter the
Initial Setup
4.Phone Line Set