Setting The Tray Use For Fax Mode; Setting Tone Or Pulse Dialling Mode (Excluding The Nordic Countries) - Brother MFC-8220 User Manual

Setting the Tray Use for Fax mode

If your MFC does not have the optional tray #2, you can skip this
setting. The default setting of Auto allows your MFC to choose the
paper from the optional Tray #2 if Tray #1 is out of paper or if
incoming faxes will fit best on the paper in Tray #2.
1
Menu
Press
2
Press
Only , Tray#2 Only or Auto .
3
Set
Press .
4
Stop/Exit
Press
If Auto Reduction is turned on, incoming faxes will be printed
from the tray that is set for Auto Reduction. (See Printing a
reduced incoming fax (Auto Reduction) on page 5-6.)
Setting Tone or Pulse dialling mode
(Excluding the Nordic Countries)
Your MFC comes set for Tone dialling service (multi-frequency). If
you have Pulse dialling service (rotary), you need to change the
dialling mode.
1
Menu
Press
2
Press
(or Tone ).
Set
Press .
3
Stop/Exit
Press
4 - 13 GETTING STARTED
1 9
, , .
or to select Tray#1
.
0 5
, , .
or to select Pulse
.
General Setup
9.Tray Use:Fax
Initial Setup
5.Tone/Pulse