Panasonic FX-301 Series Instruction Manual page 5

10 THRESHOLD VALUE ADJUSTMENT MODE
You can make fine adjustments to the threshold value while in ADJ mode.
Step Description
1 Press <MODE> briefly and repeatedly until the ADJ
operation indicator is lit.
2
Turn the jog switch to the "+" side to increase the
threshold value, i.e. decrease sensitivity, or to the "-
" side to lower the threshold value, i.e. increase sen-
sitivity.
3
Press the jog switch briefly to confirm the setting.

Set the threshold value at least a bit higher than the minimum
threshold value. The minimum threshold value is reached when
you cannot lower it any further even though the jog switch is
turned to the "-" side.
11 OUTPUT OPERATION MODE
For the output operation, you can select between Light-ON or Dark-ON.
Step Description
1 Press <MODE> briefly and repeatedly until the L/D
operation indicator is lit.
2 Turn the jog switch to switch between Light-ON (L-
on is displayed) and Dark-ON (D-on is displayed).
3 Press the jog switch briefly to confirm the setting.
12 TIMER OPERATION MODE
In the timer operation mode, you choose amongst the following settings:
 : no timer
 : one-shot timer
 : ON-delay timer
: OFF-delay timer

Step Description
1
Press <MODE> briefly and repeatedly until the TIMER
operation indicator is lit.
2
Turn the jog switch to the "+" or "-" side until the
desired timer mode is selected.
3 Press the jog switch briefly to confirm the setting.

Set the timer interval in PRO1 mode.
13 PRO MODE
For an even more detailed explanation of PRO mode, check out our Web
site for the "PRO Mode Operation Guide",
works.com, or contact our office.
PRO mode overview
PRO1
: response time change
: timer setting
: hysteresis
PRO2
: digital display setting
: digital display inversion
: ECO mode setting
PRO3
: data bank load setting
: data bank save setting
PRO4
: setting condition copy
: remote data bank load
setting
: remote data bank save
setting
PRO5
: code setting
: adjust lock setting
: reset

The 0-ADJ setting function was removed in May, 2005.
PRO mode detailed settings
1 Turn the jog switch to navigate between PRO modes.
2 Press the jog switch to enter a specific PRO mode.
3 Turn the jog switch to navigate between the settings within each specific
PRO mode.
5
www.panasonic-electric-
: stability
: shift
: emission level
: communication lock
: back-up