Table of Contents
Advertisement
OPERATING INSTRUCTIONS FOR GAMBIT ADC2 24Bit / 192kHz A/D CONVERTER
Analogue Line Inputs
2 channels, symmetrical, not earth free, on two XLR female connectors, pin 2 hot.
Input Impedance > 5kOhm
Analogue Microphone Inputs
2 channels, symmetrical, not earth free, on two XLR female connectors, pin 2 hot.
Input Impedance > 5kOhm
48V phantom power switchable
AES/EBU Input
Input fs range:
All sampling frequencies must lie within +- 100ppm of the nominal sampling frequency.
Maximum Input Wordlength:
Connector:
Impedance:
AES/EBU Output
Output fs range:
Maximum Output Wordlength:
Channel Status Data:
Connector:
Impedance:
Format:
Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster
+41 1 940 20 06
TECHNICAL DATA
44.1kHz
48.0kHz
88.2kHz
96.0kHz
176.4kHz
192.0kHz
24 Bits
XLR female
110 Ohm
44.1kHz
48.0kHz
88.2kHz
96.0kHz
176.4kHz
192.0kHz
24 Bits
Professional format
two times XLR male
110 Ohm
single wire or double wire for fs higher than 48kHz
(switch selectable)
+41 1 940 22 14
http://www.weiss. ch weiss@weiss.ch
TECHNICAL DATA
Page 11
Advertisement
Table of Contents
