Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WEISS GAMBIT DAC1-MKII
Summary of Contents for WEISS GAMBIT DAC1-MKII
- Page 1 Florastrasse 42, 8610 Uster, Switzerland ) +41 1 940 20 06 2 +41 1 940 22 14 8 http://www.weiss.ch / http://www.weiss-highend.com GAMBIT DAC1-MK2 OPERATING MANUAL Software Version: OS: 3.1 DSP: 2.1...
- Page 2 OPERATING INSTRUCTIONS FOR GAMBIT DAC1-MK2 24Bit / 192kHz D/A CONVERTER INTRODUCTION INTRODUCTION Congratulations on purchasing the Weiss Gambit Series DAC1-MK2 D/A Converter ! The DAC1-MK2 is a stereo 24 bit / 192khz D/A The correlation technique (using two con- converter designed with the aim of keeping an verters per channel) which was already suc- absolutely uncompromised audio signal path.
-
Page 3: Frontpanel Elements
- Tapers from two external faders - Four input selection switches - Four LEDs for input selection switches Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 3 of 8 +41 1 940 20 06 +41 1 940 22 14... -
Page 4: Operation
DAC1 connect pin 1 (ground) and pin 2 (hot) of the output connectors to your am- plifier. Pin 3 must be left open! Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 4 of 8 +41 1 940 20 06 +41 1 940 22 14 http://www.weiss.ch / http://www.weiss-highend.com... -
Page 5: Remote Control Connector
Input 1 to pin 10 Input 2 to pin 3 Input 3 to pin 11 Input 4 to pin 4 Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 5 of 8 +41 1 940 20 06 +41 1 940 22 14... -
Page 6: Technical Data
For asymmetrical use connect pin 1 to ground, use pin 2 as hot and leave pin 3 unconnected! Do not connect pin 2 or pin 3 to ground! Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 6 of 8... -
Page 7: Remote Connector
110 / 220 Volts with voltage selector Fuse rating: 500 mA slow blow Power Consumption: 80VA max. Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 7 of 8 +41 1 940 20 06 +41 1 940 22 14 http://www.weiss.ch / http://www.weiss-highend.com... - Page 8 "high", unbalanced: +21dBu ... - dBu range switch "low", unbalanced: +9dBu ... - dBu Output impedance: 0.2 Ohm, outputs are short circuit proof Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 8 of 8 +41 1 940 20 06 +41 1 940 22 14...
Need help?
Do you have a question about the GAMBIT DAC1-MKII and is the answer not in the manual?
Questions and answers