Tripp Lite B020-U08-19-K Quick Start Manual page 7

5. OSD (On-Screen Display) Operation
5.3 OSD Invocation Sequence
Once logged into the KVM switch, you will need to use one of two sequences to open the
OSD Main Menu; [Scroll Lock, Scroll Lock] or [Ctrl, Ctrl]. The default OSD invocation
sequence is [Scroll Lock, Scroll Lock].
Note: When using the [Scroll Lock, Scroll Lock] OSD invocation sequence, you must hold down the [Fn] key,
as the [Scroll Lock] key is part of the [Num Lock] key.
When you invoke the OSD, a screen similar to the one above appears:
Note:
1. The diagram depicts the Administrator's Main Screen. The User Main Screen does not have the F4 and F6
functions, since they can't be accessed by ordinary Users and are reserved for the Administrator.
2. OSD always starts in List view, with the highlight bar at the same position it was when it was last closed.
3. Only the ports that have been set accessible by the Administrator for the currently logged in User are
visible.
4. If the port list is collapsed into stations, simply click on the plus sign next to the desired station number, or
highlight the desired station number and hit the [Enter] key.
5.4 OSD Navigation
• To close the menu and deactivate OSD, click the [X] at the upper right corner of the
OSD Window or press [Esc].
• To logout, press [F8], click F8 on the OSD Menu Bar or click the
upper right hand corner of the OSD Screen.
• To move up or down one line at a time, click the Up and Down Triangle symbols ()
or use the Up and Down Arrow Keys. If there are more entries than appear on the
screen the screen will scroll.
• To move up or down one screen at a time, click the Up and Down Arrow symbols (   ),
or use the [Pg Up] and [Pg Dn] keys. If there are more entries than appear on the
screen, the screen will scroll.
• To activate a port, double-click it or move the Highlight Bar to it, then press [Enter].
• After executing any action, you automatically go back to the menu one level above.
7
Z
symbol at the
z
z