Tripp Lite B020-U08-19-K Quick Start Manual page 4

3. Installation
3.2 Rack Mounting for B022-U08
Fasten the rack-mount brackets to the rack with user-supplied screws to install in a rack.
3.3 Single-Station Installation
1. Ensure that power to all the connected
devices has been turned off.
2. Connect the included USB/PS2 Combo
Console Cable Kit to the console connector on
the back of the unit, then connect a monitor,
mouse and keyboard to the appropriate
connectors on the cable kit. The distance
between the external console and the KVM
switch must not exceed 66 ft. (20 m).
Note: This step is mandatory for B022-U08 KVM switches, but is optional for Console KVM Switches.
3. Use a P778-Series USB/PS2 Combo KVM Cable Kit to connect each CPU port to a
computer/server. The distance between the KVM switch and each connected computer
must not exceed 33 ft. (10 m).
4. Plug the power cord or power adapter cable into the KVM's power jack, then plug into
a UPS, surge protector or other AC power source. Turn on the power switch for the
console KVM. (Not required for the B022-U08.)
5. Turn on the power to the computers.
3.4 Multiple Station (Daisy-Chained) Installation
To control even more computers, up to 31
B022-U08 KVM Switches can be daisy-
chained down from the first station.
Note: As many as 264 computers can be controlled
from the unit's integrated console in a complete
installation.
To set up a daisy-chained
installation:
1. Ensure that power to all the connected
devices has been turned off.
2. Connect the included USB/PS2 Combo
Console Cable Kit to the console
connector on the back of the unit, then
connect a monitor, mouse and keyboard to
the appropriate connectors on the cable
kit. The distance between the external
console and the KVM switch must not
exceed 66 ft. (20 m).
Insert screws to connect to rack
8
08
1
8
08
B022-U08
8
08
B022-U08
4
2
3
4
5