Tripp Lite B020-U08-19-K Quick Start Manual page 2

1. Package Contents
• (1) B020-U08-19-K, B020-U08-19KTAA, B020-U16-19-K or B022-U08 KVM Switch
• (8) P778-006 USB/PS2 Combo KVM Cable Kits*
• (1) USB/PS2 Combo Console Cable Kit
• (1) RJ45 to DB9 Firmware Upgrade Cable
• (1) C13 to 5-15P Power Cord*
• (1) AC Power Adapter (Input: 100-240V, 50/60 Hz, 0.5A/Output: 5.3V, 2.4A)**
• (1) CD with Owner's Manual
• (1) Quick Start Guide
• (1) Grounding Wire
• (1) Rackmount Hardware Kit
• (1) Set of Rubber Feet**
*B020-U08-19-K, B020-U08-19KTAA or B020-U16-19-K only
**B022-U08 only
Check to see that the unit arrived undamaged and with all of its contents. Contact your
dealer if there is a problem.
2. System Requirements
2.1 Computer
• A VGA, SVGA or MultiSync computer with an HD15 port
Note: The max resolution for the B020-U08-19-K, B020-U08-19KTAA or B020-U16-19-K is
1280 x 1024, and 2048 x 1536 for the B022-U08. The resolutions of the connected computers must not
exceed these limits.
Either:
1. A Mini-DIN 6 (PS/2) keyboard and mouse port.
2. A USB Type-A port.
2.2 Console*
• A VGA, SVGA, or MultiSync monitor capable of the highest resolution on any system in
the installation
• A PS/2 or USB-style mouse
• A PS/2 or USB-style keyboard
*Optional external console ports are included on the NetDirector Console KVM Switches.
2.3 Cables
This KVM switch requires the following custom-wired premium cables:
Function
To Connect a PS/2 or USB Computer to the
KVM
Daisy-Chain Cables
Tripp Lite Part
P778-Series PS/2 or USB Combo KVM
Cable Kit
P772-Series Daisy-Chain Cables
2