Checking The Print Alignment - Brother MFC-680CN User Manual

k
Press Stop/Exit.
If you repeat this procedure at least five
times and the print quality is still poor,
replace the ink cartridge for the clogged
colour.
After replacing the ink cartridge, check
the print quality. If the problem still
exists, repeat the cleaning and test print
procedures at least five times for the
new ink cartridge. If ink is still missing,
call your Brother dealer.
CAUTION
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
Note
i
When a print head
nozzle is clogged
the printed
sample looks like
this.
142
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.

Checking the print alignment

You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become faded.
a
Do one of the following:
(MFC-680CN)
Press Ink Management and go to
step c.
(MFC-885CW)
Press Menu, then press a or b to
choose Ink.
Press OK.
b
Press a or b to choose Test Print.
Press OK.
c
Press a or b to choose Alignment.
Press OK.
d
Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
e
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
f
Do one of the following:
If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check and go to
step i.
If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
g
For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
h
For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
i
Press Stop/Exit.
B