Advertisement
11782200-00
Installation
Worktop cutout – flush-fit
Natural stone worktop
Wooden worktop
+ 0.5
* 7
mm with CS 7611 FL
Information for calculating the cutout
The elements overlap the worktop by 10 mm.
When installing several elements, a distance of 2 mm must be observed between
the individual elements.
Calculating cutout dimension A
1 element = Width of the element plus 2 mm on the right, plus 2 mm on the left.
Several elements = Total width of the elements plus 2 mm distance between the
elements, plus 2 mm on the right, plus 2 mm on the left
Calculating cutout dimension B = Cutout dimension A minus 12 mm on the right,
minus 12 mm on the left.
Some examples are illustrated below.
Advertisement
