Advertisement
Step Five
1.Insert a sprung wooden slat 6 through the first hole in strap 9. Repeat using
another sprung wooden slat 6 and the other strap 9.
2.Attach single sided slat cap 7 onto one end of the sprung wooden slat 6. Attach
another single sided slat cap 7 onto the other end of the second sprung wooden
slat 6.
3.Attach both sprung wooden slats to the assembled bed base by inserting each
single sided slat cap 7 into side rails 3 (x2) and using double sided slat cap 8 in the
centre. Once each slat has been inserted into the slat caps, ensure the double
sided slat cap is firmly pushed into the holes in centre rail 5.
4.Repeat process for all remaining slats and caps until all components have been
used and firmly pushed in place.
5
Advertisement
