Installation - RCF SWM-BR VSA II User Manual

Loudspeakers are to be install by qualified personnel, respecting all safety standards.
Loudspeakers are to be installed securely.
Make sure the support structure (walls / ceilings) has the necessary mechanical
characteristics for the loudspeaker weight, without the risk of a fall that could damage
things or cause an injury.
Use attachments elements suitable for walls / ceilings (e.g. wall plugs for bricks, for
concrete, etc.).
Minimum installation height: the VSA speaker bottom shall be at
least 1 m from the floor (suggested height: from 1.5 to 3 m).
T VSA
he SpeAker wood pAckAge lid cAn AlSo be uSed AS drilling TemplATe
ArrowS indicATe The Six holeS To be drilled for The brAckeTS of The
[mm]
a:
1910 (VSA 2050 II), 1202 (VSA 1250 II), 848 (VSA 850 II)
b:
1570 (VSA 2050 II), 862 (VSA 1250 II), 508 (VSA 850 II)
c:
1740 (VSA 2050 II), 1032 (VSA 1250 II), 678 (VSA 850 II)
Fix the rear part of each bracket to the wall through three suitable wall plugs having
5 mm screws (passing through the three holes, as shown in picture 2).
4
( 1:
See picTure The Six
SWM-br VSA II ) !
kiT
a
b
c

INSTALLATION

picTure 1
picTure 2