DESCRIPTION
The AC NC PIPE CLAMP accessory is a pipe clamp that allows to hang a single
loudspeaker of the new 'Compact' series to a truss pipe.
IMPORTANT NOTE: this accessory can be used with C 3106-96, C 3106-
126, C 3108-96, C 3108-126, C 3110-96, C 3110-126 models only.
INSTALLATION
Loudspeakers are to be installed by qualified personnel, respecting all safety
standards.
Loudspeakers are to be installed securely.
Make sure the support structure has the necessary mechanical characteristics
for the loudspeaker weight, without the risk of a fall that could damage
things or cause an injury.
Screw the AC NC PIPE CLAMP accessory into the loudspeaker top multiplate
and fix it with four M5x10 flat head screws (as shown in the figures 1 and
2), then hang the loudspeaker to the pipe and tighten the pipe clamp screw
(figure 3).
The pipe shall have a suitable diameter included in the 42÷55 mm range.
3