Choose the direction to which the VSA speaker may be pointed, then (for each bracket)
picTure 3
insert (without tightening completely) the two bolts with nuts (acting as pivots that join
the two parts) into one of the two holes of the bracket front part (as shown in picture 3).
As soon as the two brackets (upper and lower, necessary for a single VSA speaker) are
fixed to the wall, put the VSA speaker on their mounting points as shown in pictures
4a and 4b. Then, tighten the two securing screws (M5x10) through the VSA speaker
and the upper bracket (picture 4a).
picTure 4
picTure 4
A
b
5