Installation Instructions - RCF MA 4 User Manual

RCF S.p.A. would like to thank you for having purchased this
product, which has been designed to guarantee reliability and high
performance.

INSTALLATION INSTRUCTIONS

Install the speaker safely, checking the fixing surface is resistant
enough to support the weight of the speaker, and prevent the risk
of falling. Do not tighten the screws to fix the speaker too tightly,
and do not damage the M6 threaded inserts.
The accessory shall be installed as follows (see the figure):
1. Using two plugs, fix the support at the chosen point on the wall. The plugs
to be used must be chosen carefully depending on the type of wall material
(plasterboard, hollow bricks, solid bricks, concrete, matchboard panelling,
etc.).
2. Place the two screws with knobs (P) supplied into the M6 threaded inserts
of the speakers, without inserting them fully.
3. Couple the speaker to the support, inserting the threads of the screws (P)
that protrude from the speaker in the slots of the support.
4. Adjust the angle of the speaker and tighten the screws (P) firmly.
NOT INCLUDED
P
5