Mounting The Deflector - Stihl FS Instruction Manual

Mounting the Deflector

Mounting the Deflector
1
3
2
3
1 Deflector for mowing attachments
2 Deflector for mowing heads
Deflectors (1 and 2) are both mounted to
the gearbox in the same way.
Place the deflector on the gearbox
N
flange.
Insert the screws (3) and tighten
N
them down firmly.
FS
Fitting the Skirt and Blade
4
4
1
5
WARNING
These parts must be fitted to the
deflector (1) when you use a mowing
head.
Slide the lower guide slot of the skirt
N
(4) onto the deflector (1) – it must
snap into position.
Push the blade (5) into the upper
N
guide slot on the skirt and line it up
with the first hole.
Insert the screw and tighten it down
N
firmly.
Mounting the Limit Stop
7
6
WARNING
Always fit the limit stop (6) when you use
a circular saw blade.
Position the limit stop (6) on the
N
gearbox flange.
Insert the screws (7) and tighten
N
them down firmly.
English
49