Lubricating The Gearbox; Storing The Machine - Stihl FS Instruction Manual

English
Swing wire rod outwards.
N
Fit transport guard on saw blade
N
from below, making sure the limit
stop is properly seated in the
recess.
Swing wire rod into position.
N
Hook wire rod to the transport
N
guard.
58

Lubricating the Gearbox

1
Check the grease level regularly –
N
about every 25 hours of operation.
Unscrew the filler plug (1). If no
N
grease can be seen on the inside of
the filler plug, screw the tube (2) of
STIHL gear lubricant (special
accessory) into the filler hole.
Squeeze up to 5 g grease into the
N
gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
Remove the tube of grease (2).
N
Refit the filler plug (1) and tighten it
N
down firmly.
2.

Storing the Machine

For periods of about 3 months or longer
N
2
N
Remove, clean and inspect the
cutting attachment. Coat metal
cutting attachments with corrosion
inhibitor.
Store the machine in a dry and
secure location Keep out of the
reach of children and other
unauthorized persons.
FS