Advertisement
LED Charging Status
FOREIGN OBJECT DETECTION: Please follow the MAGICPLATE
2 or 3 for best charging results. Note that blocking the charging coil with anything metallic object
may cause the module to not work as designed.
BATIERY VOLTAGE REQUIREMENTS: The MQUSM (Qi Module) is designed to operate at
voltages between 13.2-14.7. If your vehicle does not supply sufficient voltage with the ignition OFF,
you may need turn the ignition to the ON position in order to operate the MQUSM. For questions
about this product please contact our Scosche tech support team at: (800) 363-4490 ext. 1 or
www.scosche.com/contact.
LED CHARGING STATUS
The LED indicator on the side of the mount illuminates the charging status
of the device. When powered ON, the indicator blinks in the following
order: BWE, GREEN, BLUE.
Standby = Green
Charging = Blue
7. A. Retrieve shifter/tray panel removed during step 5, C of the disassembly.
B. Align and place the HAQ02 bezel onto the shifter panel.
C. Mark the drill location with a contrasting chalk/marker.
D. Remove the HAQ02 bezel.
E. Carefully make a hole large enough to pass the provided type-c connector though.
CAUTION! : DO NOT attempt to drill a hole while the panel illustrated above is still mounted to the vehicle.
TESTING QI MODULE (MQUSM)
PREPARATION
B&D
™
mounting instruction on pages
E
6
Cont'd
Advertisement
