Troubleshooting - Electrolux EOD3C00X User Manual

30 www.electrolux.com
12.7 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Turn off the oven. Wait un‐
til the oven is cold.
Back lamp
Step 1
Step 2
Step 3
Step 4

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table
please contact with an Authorised
Service Centre.
Problem
The oven does not
heat up.
The door gasket is
damaged.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on
the front frame of the oven cavity. Do not remove the rating plate from the oven cavity.
Before you replace the lamp:
Step 1
Disconnect the oven from
Turn the glass cover to remove it.
Clean the glass cover.
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Install the glass cover.
Check if...
The fuse is blown.
Do not use the
oven. Contact an
Authorised Service
Centre.
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
Step 2
the mains.
Problem
The display shows
"12.00".
The water leaks
out of the cavity
embossment.
Unsatisfying cook‐
ing performance of
the function: True
Fan Cooking
PLUS .
The lamp does not
work.
Step 3
Put a cloth on the bottom
of the cavity.
Check if...
There was a power
cut. Set the time of
day.
There is too much
water in the cavity
embossment.
You filled the cavi‐
ty embossment
with water.
The lamp is burnt
out.